Fuji HVLP Spray Gun Reviews

If you are a DIY homeowner, who likes to do the paint jobs around the house yourself; chances are, you likely use spray guns a lot, or maybe feeling the need to buy one right now.

It’s not really convenient to use time-consuming tools like paint rollers for DIY people, but automatic HVLP paint sprayers can totally change the game for you. Whether you have been using an HVLP sprayer for a while now, or a complete newbie to the whole automatic sprayer thing, choosing one good brand of spray guns among several is not easy.

Top 5 Fuji HVLP Spray Gun Specification Details

Product Specifications

Turbine Spray Guns

Fuji 5070 - T70 Spray Gun Fuji 5070 - T70
Spray Gun

Buy From Amazon
Low Overspray: Yes
Fan Pattern (in): 12
Flow Rating (gpm): 0.8
Maximum Hose Length (ft): 50
Operating Pressure (psi): 10
Maximum Pressure Rating (psi): 10
Maximum Tip Size: 2.5
Weight: 2.3 lbs
Other Specifications:
  • 100% stainless steel fluid components
  • 1.3mm High-efficiency air cap pre-installed
  • Non-bleed spray gun
  • Side pattern control knob
  • Rear rotating nipple for pressure tube
  • Stay-cool nylon handle with metal tube fitting
  • Metal fluid knob & collar
  • 1 Qt. bottom feed cup
Pros:
  • Fan size adjustability and precision
  • Non-bleed design
  • Negligible turbulence
  • Lightweight & sleek
  • High-Efficiency air cap
Cons:
  • Expensive
  • Needs additional air compressor
Editor's Review:
Fuji Spray  5175G - T75G Gravity Spray Gun Fuji Spray 5175G - T75G
Gravity Spray Gun

Buy From Amazon
Low Overspray: Yes
Fan Pattern (in): 12
Flow Rating (gpm): 0.8
Maximum Hose Length (ft): 50
Operating Pressure (psi): 10
Maximum Pressure Rating (psi): 10
Maximum Tip Size: 2.5
Weight: 1.95 lbs
Other Specifications:
  • 100% stainless steel fluid components
  • 1.3mm High-efficiency air cap pre-installed
  • Non-bleed spray gun
  • Side pattern control knob
  • Rear rotating nipple for pressure tube
  • Stay-cool nylon handle with metal tube fitting
  • Metal fluid knob & collar
  • 3 600cc nylon gravity cup
  • Gasket-less lid for the cups
Pros:
  • Fan size adjustability and precision
  • Non-bleed design
  • Negligible turbulence
  • Lightweight & sleek
  • High-Efficiency air cap
  • Nylon Gravity Cup holds more paint
Cons:
  • Expensive
  • The cup and lid might wear off later
Editor's Review:
Fuji 9600-G Gravity G-XPC Spray Gun Fuji 9600-G Gravity
G-XPC Spray Gun

Buy From Amazon
Low Overspray: Yes
Fan Pattern (in): 12
Flow Rating (gpm): 0
Maximum Hose Length (ft):
Operating Pressure (psi): 10
Maximum Pressure Rating (psi): 10
Air cap sizes available (mm) 0.7; 1.0; 1.4 - standard; 1.8; 2.2
Maximum Tip Size: 2.2mm
Weight: 2.7 lbs
Other Specifications:
  • 100% stainless steel fluid components
  • 1.4mm High-efficiency air cap pre-installed
  • Non-bleed spray gun
  • Side-mounted fan pattern control
  • Stay-cool nylon handle with metal tube fitting
  • Metal fluid knob & collar
  • 600cc nylon gravity cup, 400cc and 3oz gravity cups
  • Fuji Spray Turbines
  • Cup tilt feature
  • Gasket-less lid for the cups
Pros:
  • Fan size adjustability and precision
  • Non-bleed design
  • Negligible turbulence
  • Lightweight & sleek
  • High-Efficiency air cap
  • Nylon Gravity Cup holds more paint
  • Can spray in any direction
  • Pressurized cup for less leak
Cons:
  • Expensive
Editor's Review:

Compressor Spray Guns

Fuji 6355G-MP-C-14K Gravity MPX-30 Reduced Pressure Spray Gun Fuji 6355G-MP-C-14K
Gravity MPX-30

Buy From Amazon
Low Overspray: Yes
Fan Pattern (in):
13 Flow Rating (gpm):
Maximum Pressure Rating (psi): 13.8Cfm at 36Psi
Included Tip Size: 1.4mm & 1.3mm
Available Tip Size (mm): 1.0; 1.3; 1.4; 1.7; 2.0
Weight: 2.6 lbs
Other Specifications:
  • 65% > transfer efficiency
  • 100% stainless steel fluid components
  • 1.4mm cup for gravity feed compressor (extra 1.3mm air cap)
  • 1.7mm cup for siphon feed compressor
  • Wrench and cleaning brush included
  • Non-bleed spray gun
  • Side-mounted fan pattern control
  • Stay-cool nylon handle with metal tube fitting
  • Metal fluid knob & collar
  • 600cc nylon gravity cup
  • High-pressure regulator gauge
Pros:
  • Fan size adjustability and precision
  • Non-bleed design
  • Negligible turbulence
  • Lightweight & sleek
  • High-Efficiency air cap
  • Nylon Gravity Cup holds more paint
  • More pressure than HVLP
  • Higher atomization levels
Cons:
  • Hard to get used to
Editor's Review:
Fuji 6265G-LX-C-14K - Gravity Feed HVLP Compressor Spray Gun Fuji 6265G-LX-C-14K -
Gravity Feed HVLP

Buy From Amazon
Low Overspray: Yes
Fan Pattern (in): 13
Maximum Pressure Rating (psi): 15.2cfm at 26psi
Included Tip Size: 1.2mm & 1.7mm
Weight:
Other Specifications:
  • High transfer efficiency
  • 100% stainless steel fluid components
  • 1.2mm and 1.7mm air cap
  • Non-bleed spray gun
  • Side-mounted fan pattern control
  • Stay-cool nylon handle with metal tube fitting
  • Metal fluid knob & collar
  • 600cc nylon gravity cup
  • High-pressure regulator gauge
Pros:
  • Fan size adjustability and precision
  • Non-bleed design
  • Negligible turbulence
  • Lightweight & sleek
  • High-Efficiency air cap
  • Nylon Gravity Cup holds more paint
Cons:
  • Expensive
Editor's Review:

Fuji Spray® is an award-winning Canadian manufacturer of spray systems. They have two types of spray guns. The turbine spray guns are the T-Model™ series. And the compressor spray guns are the LX-20™ and MPX-30™.

Their T-Model™ is the newest edition of HVLP spray guns in their catalog. This series of spray guns are designed for flexibility, control, ergonomics and convenience for the user. The G-XPC is also part of the T-Model series. LX-20 and MPX-30 have been developed to fill the gap between conventional high-pressure spray guns and HVLP.

The article will feature Fuji HVLP Sprayer Reviews, we will go through all the specs and pros and cons of each for you.


Fuji 5070 – T70 Spray Gun

Fuji 5070 - T70 Spray GunLightweight, sleek-looking spray guns are the new choice of DIYer’s. They look for smaller size with better control, rather than large, heavy, feature-packed guns that will bust your hand up over the years.

The T-Series Spray Gun sports a side pattern control knob. The knob is used to adjust the size of the fan from small to large; precisely according to the object, you are painting. The T-series Fuji 5070 – T70 Spray Gun is lightweight and sleek, has only 1 Qt. of bottom feed cup. It has a non-bleed design so that 1 Qt. of cup will not be needing refill even after hours of use. It has 1.3mm air cap set, pre-installed. The nipple for the pressure tube can be rotated behind, very convenient for lefties. The Stay-cool nylon handle with metal tube fitting, metal fluid knob and collar give the spray the sturdiness it will need.

It won’t blow around shop dust and the turbulence around the spray are is very negligible. It won’t splatter sprays all around, finishes the job neat and clean. The price of the T-Series is a bit on the higher side though, but it still is a suited candidate for any DIYer’s needs.

Buy From Amazon


Fuji Spray 5157G – T75G Gravity 

Fuji Spray 5175G - T75G Gravity Spray GunThe T75G has all the features of the T70 and more. The side pattern control knob for better adjustment of fan pattern and size, non-bleed design for greater control and less blow, sleek and lightweight design, high-efficiency air cap pre-installation to prevent overspray, great atomization and 100% stainless steel fluid components coupled with ergonomic stay-cool handle. All of these are mutually common features of the Fuji Spray 5157G – T75G Gravity Spray Gun and Fuji 5070 – T70 Spray Gun.

But the T75G has more. It comes installed with 600cc nylon gravity cup and lid, holds much more paint. The lid provides a great seal without gasket for the cup (the cup is center-mounted), and there are also 3 additional gravity cups available. The price is almost the same as the T70, albeit a bit higher. You are guaranteed to achieve the best result with this tool, in whatever type of paint job you can throw at it.

Buy From Amazon


Fuji 9600-G Gravity G-XPC Spray Gun

Fuji 9600-G Gravity G-XPC Spray GunThis one is a re-launched version of the famous G-XPC gravity spray gun, under the banner of the new and improved T-series. The Fuji 9600-G Gravity G-XPC spray gun has side-mounted 400cc tilt-able gravity cup that enables you to work multi-directionally (including upwards!). The cup is pressurized to increase the spraying range.

Like the other two, it has side-mounted fan pattern control to adjust the fan size and 1.4mm pre-installed air cap. It is designed to work in ceramics, wood, tiles like bathtub refinishing and cabinets/furniture and automotive. Lacquers, enamels, polyurethanes, latex and water-based coatings are all usable with this gun.

It’s non-bleed, includes Fuji Spray Turbines with a bleed-off inside the turbine. Optional 3oz, 400cc, and 600cc cups are also available. The price is quite similar to the other two.

Buy From Amazon


Fuji 6355G-MP-C-14K Gravity MPX-30

Fuji 6355G-MP-C-14K Gravity MPX-30 Reduced Pressure Spray GunThe MPX-30 was built to fill the gap between high-pressure spray guns and HVLP spray guns. The merge of medium levels of pressure with higher transfer rates, the MPX-30 is a general-purpose spray gun for professional use or DIY. It can handle any type of coating, including solids.

It’s designed to be user-friendly, has conventional control schemes of other high-pressure spray guns, but adds the benefits and convenience of HVLP. It has superior fan pattern control like the other ones on this list, reduces overspray and waste. The air cap is optimized to give softer sprays and better atomization. The wide fan and high material flow rates ensure constant speed of work. The gun is also compact, lightweight and easy to handle, with an equally ergonomic design.

The price is a bit cheaper than the other two but doesn’t lack in comparison. The transfer efficiency is above 65%, saves paint by ensuring less overspray and gives a 1-year warranty.

Buy From Amazon


Fuji 6265G-LX-C-14K – Gravity Feed

Fuji 6265G-LX-C-14K - Gravity Feed HVLP Compressor Spray GunThe Fuji 6265G-LX-C-14K has high transfer efficiency for less overspray and increased savings. It works great with water-borne and solvent-based coatings.

The recommended pressure is 15.2cfm at 26psi. There are 2 extra air cap sets included, on is 1.2mm and other is 1.7mm. The nylon gravity cup holds 600ccs of paint and has a regulator gauge. The build is 100% stainless steel fluid components.

The price of the Fuji 6265G-LX-C-14K is a bit higher than the rest of this list. But it is the most professional one here also, with the versatility to use all types of coatings equally efficiently. It replaces conventional high-pressure spray guns. There is also precise fan pattern control and other common features of Fuji that makes it a wonderful product.

Buy From Amazon


FAQ

  1. Is it normal for turbine case to get hot?
  • Yes, it is. The turbine motor produces heat which is then transferred to the turbine case. It will be best to allow the turbine 10-15 minutes of rest for every 45 minutes of use.
  1. Where should I place the Turbine?
  • 20ft away form the spray area would be a good distance. The turbine needs a large volume of cool air.
  1. How far should I hold the spray gun from the object?
  • As it is fan-shaped, for a larger size fan it will be good to keep it 6”-8” further from the surface. Moving too close will result in bounce back and moving too far can give dry spray.
  1. Can they be used for wall painting?
  • It’s not specifically designed for that, but many users have used the HVLP spray guns for that purpose as well and they were very happy with the results.
  1. How to Reduce Overspray?
  • Adjust the fan size to suit the project. Thin only as much as necessary. Never hold it further than 8 inches for any project, reduce the air pressure, get used to the triggering process and use some type of extraction fan if you can.
  1. How to clean the HVLP Spray Gun?
  • Water or lacquer thinner is the appropriate solvent. Use a solvent soaked rag to clean out residue of the cup, remove the filter and fill it halfway with solvent. Use a wrench to remove knobs and fluid nozzles and use a small amount of solvent as well. To clean the needle use cleaning brush. For further instructions check out the official printable PDF in Fuji’s webpage or the manual that comes with the product.

Conclusion

The correct spray gun can drastically change the look of your project or increase efficiency by a large margin. And Fuji delivers on their promises about efficiency. So, don’t wait so much and invest in one, it will pay off! We hope you’ve found the right one for you by reading this article.

Click Here to Leave a Comment Below 0 comments

Leave a Reply: